8.1.0 Wheels and Axles

I temporarily held the PEX tubing in place with some tie-wraps and then used my hot glue gun to lock the tubing into place. Once the hut glue cured I removed the tie-wraps and installed two layers of BID, per the manual, to lock the tubing into place. I now have a nice conduit for the brake line to pass through.

Fuselage - Main Gear Brake Line Conduit

I'm using some Pex tubing from Home Depot for the brake line conduit.

The next step is installing the axles which begins in Section 8.1.2.

ui© John Trautschold 2018